Material: carbon steel & stainless steel
Not require precise hole depth or hole cleaning out.
Anchor can be hammered below the surface of the concrete when no longer needed
The one piece clip is formed around anchor,assuring full expansion for dependable, superior holding prower. Expanding clips will not fall off or twist in thw hole.
The test Vlues listed beneath were obtained using 200-250 kgs/cm concrete(no aggregate). A safe working load should not exceed 25% of stated value.
Anchor Size |
Min. Thread Length |
Min. Embedment |
Max.Fast Thickness |
Weight kgs per 1000pcs |
Pull Out Load(kgs) Gold Forming Anchor latheAnchor |
1/4×1-3/4 | 3/4 | 1-1/8 | 1/8 | 900 | 900 |
1/4×2-1/4 | 1-1/4 | 3/8 | |||
1/4×3 | 2 | 1-1/8 | |||
1/4×3-1/4 | 2-1/4 | 1-3/8 | |||
5/16×2 | 3/4 | 1-1/2 | 1/8 | 1300 | 1150 |
5/16 | 1-9/16 | 9/16 | |||
5/16 | 2-1/4 | 1-1/8 | |||
3/8×2-1/8 | 3/4 | 1-1/2 | 1/8 | 1700 | 1500 |
3/8×2-1/4 | 7/8 | 3/16 | |||
3/8×2-3 | 1-3/8 | 3/8 | |||
3/8×3 | 1-5/8 | 9/16 | |||
3/8×3-1/2 | 2-1/8 | 1 | |||
3/8×3-3/4 | 2-3/8 | 1-1/8 | |||
3/8×5 | 3-5/8 | 2-3/8 | |||
1/2×2-3/4 | 7/8 | 2-1/4 | 1/8 | 2600 | 2400 |
1/2×3-3/4 | 1-7/8 | 11/16 | |||
1/2×4-1/4 | 2-7/16 | 3/4 | |||
1/2×5-1/2 | 3-11/16 | 2 | |||
1/2×7 | 4 | 3-1/8 | |||
5/8×3-1/2 | 1-3/8 | 2-3/4 | 1/ | 3800 | 3400 |
5/8×4-1/2 | 2-3/8 | 9/16 | |||
5/8×5 | 2-7/8 | 1-1/8 | |||
5/8×6 | 3-7/8 | 2 | |||
5/8×7 | 4 | 3-1/8 | |||
3/4×4-1/4 | 1-7/8 | 2003/1/4 | 9/16 | 5800 | 5400 |
3/4×4-3/4 | 2-3/8 | 1 | |||
3/4×5-1/2 | 3-1/8 | 1-5/16 | |||
3/4×6-1/4 | 3-7/8 | 1-3/4 | |||
3/4×7 | 4 | 2 | |||
3/4×8-1/2 | 4 | 3-1/8 |
For Better Rigging hardware, Chains, Fasteners